HEGGEL EP 610 is a two-component, high resilient and temperature resistant epoxy resin-based mortar.

Characteristics:

• Resilient at higher temperatures
• Temperature resistance up to +150°C (steel substrates)

HEGGEL EP 611 is a highly wear resistant filler system with hard material fillers based on an epoxy resin.

Characteristics:

• Short curing time
• Highly wear resistant
• Joint less
• Overhead application possible
• Layer thicknesses from 5 mm up to 40 mm
• Temperature resistance up to +150°C (steel substrates)

HEGGEL PL 620 is a two-component mortar based on a modified phenolic resole resin and carbon filler for easy bedding and jointing of acid-resistant ceramic tiles, bricks or carbon bricks.

Characteristics:

• Excellent adhesion to ceramic and carbon bricks
• Extremely high chemical resistance, especially to acids, solvents and weak oxidizing chemicals
• The hardened mortar conducts electricity
• Suitable for linings, where a pre-stressing must be achieved

HEGGEL PL 621 is a black, two-component, cold curing synthetic mortar based on a modified phenol resin with carbon fillers.

Characteristics:

• Excellent adhesion to ceramic and carbon bricks
• Extremely high chemical resistance, especially to acids and solvents
• The hardened mortar is electrical conductive
• HEGGEL PL 621 SOLUTION does not separate water during storage
• Very good application because of dust free fillers

HEGGEL FU 631 is a two-component mortar based on a modified furan resin with carbon filler used for easy bedding and jointing of acid-resistant ceramic bricks, tiles or carbon bricks.

Characteristics:

• Temperature resistance up to 220°C (Dependent on the type of chemical being used)
• Excellent chemical resistance to a wide range of media: Various inorganic and organic acids and alkalis (including hydrofluoric acid), solvents, hydrocarbons, greases, oils and fuels
• Excellent adhesion to ceramic tiles, bricks or carbon bricks
• Electrically conductive
• Suitable for tank linings, as the relatively high shrinkage does not have as strong an effect here as with large-area floor tilings

HEGGEL FU 632 is a two-component mortar based on a modified aldehyde-free furan resin with a carbon- containing filler used for easy bedding and jointing of acid-resistant ceramic bricks, tiles or carbon bricks.

Characteristics:

• Temperature resistance up to 280°C (immersed) and up to 350°C (short-term) depending on the type of chemical being used
• Excellent chemical resistance to a broad range of media, including inorganic acids (also Hydrofluoric acid)
• Reliable component storage stability, even at elevated temperatures
• Superior adhesion to ceramic tiles, bricks or carbon bricks
• Suitable for tank linings, as the relatively high shrinkage does not have as strong an effect here as with large-area floor tilings
• Electrically conductive
• Very good thermal shock resistance
• Great stability in wet-dry transitions areas
• Hardening with low shrinkage

HEGGEL FU 633 is a two-component mortar based on a modified aldehyde-free furan resin used for easy bedding and jointing of acid-resistant ceramic bricks, tiles or carbon bricks.

Characteristics:

• Temperature resistance up to 180°C (Dependent on the type of chemical being used)
• Excellent chemical resistance to a wide range of media: Various inorganic and organic acids and alkalis, solvents, hydrocarbons, oils and fuels
• Applicable with a joint injector
• Excellent adhesion to ceramic tiles, bricks or carbon bricks
• Electrically conductive
• Economical due to favourable resin / filler ratio / high filler content of the mortar

Highlights:

• Excellent chemical resistance to a wide range of solvents, acids and alkalis
• Temperature resistance up to +180°C
• Excellent adhesion to ceramic tiles, bricks or carbon bricks
• Impressive mechanical properties

HEGGEL FU 638 is a two-component aldehyde-free mortar based on a modified furan resin and hydrofluoric acid-resistant fillers for easy bedding and jointing of acid-resistant ceramic tiles, bricks or carbon bricks.

Characteristics:

• Excellent chemical resistance to a wide range of media: Various inorganic and organic acids and alkalis (including hydrofluoric acid), greases, oils and fuels, solvents and various hydrocarbons.
• Excellent adhesion to ceramic tiles, bricks or carbon bricks
• Temperature resistance up to 180°C (Dependent on the type of chemical being used)
• Electrically conductive
• Economical use due to favourable resin/filler ratio

HEGGEL VE 640 is a multi-component synthetic resin mortar made from a blend of Epoxy Novolac Vinyl-Ester resin and a quartz-based filler. Its primary purpose is facilitating easy bedding and jointing of acid-resistant tiles and bricks. For applications demanding electrical conductivity or hydrofluoric acid resistance, HEGGEL VE 641 is the recommended choice.

Characteristics:

• Excellent bonding with ceramic tiles and bricks
• Exceptional resistance to acids, alkalis, solvents, and oxidizing agents
• Temperature resistance up to 120°C (subject to the specific chemical application)

HEGGEL VE 641 is an epoxy Novolac Vinylester resin mortar formulated with carbon fillers for facilitating easy laying and jointing of acid-resistant ceramic tiles, bricks, or carbon bricks.

Characteristics:

• Excellent chemical resistance to a wide range of media: Acids, alkalis, solvents and oxidising media.
• High adhesion strength to ceramic tiles, bricks or carbon bricks
• Hydrofluoric acid resistance
• Temperature resistance up to 120°C (Dependent on the type of chemical being used)
• Suitable for both indoor and outdoor applications
• Electrically conductive

HEGGEL PS 650 is a two-component mortar, formulated with a modified unsaturated polyester resin and a hydrofluoric acid-resistant filler. This mortar is specifically engineered for the convenient installation and jointing of acid-resistant ceramic tiles, bricks or carbon bricks.

HEGGEL PS 655 is a two-component mortar, formulated with a modified unsaturated polyester resin. This mortar is specifically engineered for the convenient installation and jointing of acid-resistant ceramic tiles and bricks.

Characteristics:

• Outstanding bonding with ceramic tiles and bricks
• Exceptional resistance to a wide range of inorganic and organic acids, alkalis and oxidizing agents
• Withstands temperatures of up to 100°C (Subject to the specific chemical application)
• Suitable for both indoor and outdoor use

HEGGEL SP 660 is a two-component halogen-free mortar formulated with water glass, primarily designed for the comprehensive bedding and jointing of acid-resistant tiles, bricks, and moulded parts. It is ideally suited for applications in floor tiling or as a lining for tanks.

Characteristics:

• Halogen-Free, containing no Fluoride
• Extremely high resistance against acids
• Temperature Resistance up to +900°C

HEGGEL SP 662 is a one component halogen-free water glass mortar designed for spray application, similar to shotcrete. For fast and easy application, only water needs to be added to the pre-formulated system containing a hardener, enabling chemical curing of the mortar.

Characteristics:

• Excellent acid resistance (not including hydrofluoric acid)
• Highly resistant to aggressive gases or flue gas components
• Provides optimal bond strength to steel with a similar thermal expansion coefficient
• The expansion coefficient is similar to ceramic bricks
• Temperature resistance up to 900°C (Dependent on the type of chemical being used)
• Easy preparation and application
• Halogen-free

HEGGEL SP 664 is a halogen-free Sodium Silicate mortar, which in order to be applied only needs to be mixed with water; which chemically reacts with the powder to harden. The Hardener and Binder are included in the powder.

Characteristics:

• Halogen-Free containing no fluorides
• Extreme high corrosion protection
• Temperature Resistance to +900° C
• Easy to use

HEGGEL SP 665 is a grey, halogen free sodium silicate mortar, which by mixing with water, chemically reacts to harden. The hardener and binder are included in the powder.

Characteristics:

• Halogen-Free containing no fluorides
• Extreme high corrosion protection
• Temperature Resistance to +900° C
• Easy to use

HEGGEL SP 668 is a two-component, halogen-free water glass mortar designed for bedding and joining of acid-resistant tiles or bricks specially on floors. Tile lining systems bedded and jointed with HEGGEL SP 668 provide strong resistance to chemicals and heat, especially in acidic and neutral environments.

Characteristics:

• Excellent acid resistance (not including hydrofluoric acid)
• Highly resistant to oxidizing agents, organic solvents, oils, greases, and fuels
• Water-resistant, suitable for neutral pH environments, and rainwater-resistant, making it suitable for outdoor use
• Temperature resistance up to 450°C (Dependent on the type of chemical being used)
• Can be applied to metal surfaces without pre-treatment
• Halogen-free

HEGGEL SP 669 is a two-component, inorganic silicate based castable concrete consisting of a potassium silicate solution and a catalyzed mineral filler powder. It replaces the need for Portland cement–bonded concrete in new construction and maintenance operations. The grain size of this product makes it suitable for any application, with grain sizes of 1, 3, and 6 mm available. HEGGEL SP 669 should not be used at thicknesses less than 20 mm. It has relatively high surface porosity, which enhances performance under thermal cycling conditions. However, care should be taken in environments with variable temperatures and moisture, as freeze–thaw cycles can lead to premature disintegration of the castable body.

Characteristics:

• Excellent acid resistance (not including hydrofluoric acid)
• Excellent resistance to organic materials like solvents and oils
• Refractory temperature resistance up to 900°C (Dependent on the type of chemical being used)
• Highly resistant to strong oxidizing acids like sulphuric acid

HEGGEL EP 671 is a black, three-component, cold curing synthetic mortar based on an epoxy resin with very good resistance against abrasive loads.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing

HEGGEL EP 672 is a three-component, cold curing synthetic mortar based on epoxy resin and depending on the application with different fillers.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing

HEGGEL EP 673 is a three-component, cold curing synthetic mortar based on epoxy resin and depending on the application with different fillers.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing

HEGGEL EP 674 is a grey, three-component, cold curing synthetic mortar based on an epoxy resin and depending on the application with different fillers.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing
• Universal "all round" material